Operation manual for Thunder laser machine

Operation manual for Thunder laser machine

To be safe, never ever run the laser system unattended.

According to international standard，“O”means close；“I”means open for the rocker switch below.

1. Turn on the water chiller



2. Startup sequence of machine: Main Switch→Laser switch;

   


3. Connect computer and download file to machine；

   

4. Adjust the height of working table, place the material；

  

① Click Z/U button;
② Select “Z move”
③ Left arrow to move down;
④ Place the material;
⑤ Right arrow to move up;

5. Fix the material with magnet, adjust right focal distance with focus tool;



6. Close the top lid;



7. Select the appropriate start point, start the program;



① Control arrow button to move the laser head;
② Click “Origin” button to select the start point;
③ Click “Frame” button to be sure the working area;
④ Click “Start-Pause” to run the program;

8. Shutdown sequence of machine：Laser switch→Main Switch→Turn off the water chiller;

Any accident during working, please press emergency stop immediately

Standard feature
Water chiller:
https://nz.thunderlaser.com/features/water-cooling-system.html
Air compressor:
https://nz.thunderlaser.com/features/air-assist.html
Exhaust fan:
https://nz.thunderlaser.com/features/exhaust-system.html

End