Development of laser cutting machine
The laser cutting and drilling of plastic film seems insignificant, but the introduction of technology into the manufacturing process will further optimize the bag making quality and packaging function, and further enhance the market competitiveness of enterprises. The principle and advantages of laser technology applied in plastic film cutting and drilling are introduced. The research […]
How to remove and install the galvanometer of laser marking machine
After the laser marking machine has been used for a period of time, there may be some problems, such as the laser marking machine cannot normally mark, or the light does not come out. After careful investigation, we found that there is something wrong with the vibrator. At this time, we need to remove the […]
Several principles of laser cutting machine
Laser Vaporization Cutting: The use of high energy density of the laser beam heating the workpiece, so that the temperature rise, the material began to vaporize, forming steam. These vapors are ejected at high velocities and form incisions in the material as the vapors are ejected. The heat of vaporization of materials is generally very […]
Control of laser drilling size and precision of laser cutting machine
(1) Aperture size control a laser with a small divergence angle (0.001 to 0.003 rad) is used, and a small aperture can be obtained by shortening the focal length or reducing the output energy. For high melting point. The material with good thermal conductivity can realize the micro-hole processing with the aperture of 0.01 to […]
New era brought by laser cutting machine
According to the international safety standards, the laser hazard level is divided into four levels, fiber laser is the most harmful level because of its short wavelength and great harm to human eyes, and fiber laser processing needs a completely closed environment for safety reasons. YAG solid laser cutting machine has the characteristics of low […]
How to use the laser cutting machine to minimize the harm?
When new equipment and some high-tech machinery appear, because it is new, there are many differences with the traditional working principle, and the working principle will be more complex, often want to operate also need to have some skills. As a laser cutting machine compared with the traditional cutting machine, will be more clever.And for […]
